Skip to main content
  • LIT
  • RUS
  • ENG
  • Services
  • Home
  • Contact
  • Store
  • Products
    • Construction
    • Forest
    • Industrial paints
    • Pro Tech
    • Line marking
    • Events
    • Markers
  • Dityspray
  • SOPPEC
  • BLEISPITZ
  • LATSCHBACHER
  • PRINZ

Browse

  • All
  • Construction - aerosols
  • Forest - aerosols
  • Industrial paints - aerosols
  • Pro Tech - technical aerosols
  • Line marking - aerosols
  • Events - aerosols
  • Markers
  • Working Tools
  • DITYSPRAY
  • Store
  • Line marking - aerosols
  • TRACING SPORT FIELD PAINT [12 Months]

TRACING SPORT FIELD PAINT [12 Months]

€29.00


Add to cart  

TRACING® Sport, the line marking solution speci cally designed for multisport grass sports elds. TRACING® Sport is available as a 750 ml aerosol (net volume) and meets the most demanding requirements for high quality marking. TRACING® Sport is applied using a marking trolley speci cally designed for grass sports felds.

PROPERTIES

• Crisp and precise marking thanks to its purpose-designed nozzle

• Rapid drying (15-20 min)

• Excellent coverage

• Specially-designed formulation that will not damage the grass

• Weatherproof for long-term marking

• Temperature of use: +5° to 50°C

SPECIFICATIONS

Composition

Binder: acrylic
Pigments: mineral and organic, free from lead and cadmium
Solvents: a complex blend free from chlorinated solvents and aromatic compounds (toluene, xylene, etc)
Propellant: a speci c mix of isobutane and propane

Application method

Manually or using our application equipment (4 wheel marking trolley, see page ..)
Drying Time: 15 to 20 min

Health and safety

Safety data sheets are available free of charge on the internet: www.quick-fds.com
CLP labelling with a single pictograph 

GENERAL CONDITIONS FOR USE

For a good quality line, the rst coat should be ap- plied quickly (print layer); however the second and optional third coats should be applied more slowly to obtain the desired coverage.

For maximum visibility, a 2-coat application (with a rapid rst application) is recommended.
Marking applied to wet or damp grass will have a shorter life.

Whenever possible apply to dry ground.

RECOMMENDATIONS FOR USE

• Use head down, adjust the position of the aero- sol in the equipment used to give an application height that produces the desired line width.

• BEFORE USE: Shake the can vigorously in an upside down position to thoroughly mix the paint, continue shaking even after having clearly heard the ball bearings.

• AFTER USE: Purge head up (until gas only co- mes out) to clean the valve and nozzle. 


Cart

Cart is empty.